Effect of Adding Favorable Elements on Properties of Alloy Steel

Sep 27, 2022 Leave a message

Steel is widely used in industry, and its main elements are iron and carbon alloys, in other words, steel is a compound of iron and carbon. In addition to iron and carbon, there are many trace elements in steel, some of which are left in the smelting process, and some are used to improve the strength and comprehensive properties of low-alloy steel. In this paper, the influence of common alloying elements on the properties of steel is discussed, including manganese, silicon, chromium, nickel, aluminum, vanadium, niobium, titanium, nitrogen, boron, rare earth elements, sulfur, phosphorus, oxygen and hydrogen.

Favorable elements

Silicon and manganese: are the most commonly used strengthening elements in low alloy steels.

Chromium and nickel: The amount of chromium and nickel in low alloy steel is not large, generally not more than 1%. Its main function is to increase the degree of undercooling of austenitic steel, thereby refining the structure and increasing the strength moderately. Chromium and nickel can also increase steel. High atmospheric corrosion resistance, improved impact toughness and reduced cold-brittle transition temperature.

Molybdenum: It has obvious solid solution strengthening effect. At the same time, molybdenum is a strong carbide forming element, which is beneficial to improve the high temperature strength of steel and prevent temper brittleness of steel. Molybdenum can also delay the transformation of supercooled austenite to pearlite, which has a significant effect on the microstructure of the steel. The main adverse effect of molybdenum is to promote the graphitization of steel.

Vanadium: Strengthens in steel by carbide precipitation and grain refinement. The vanadium content in the steel should not be too high, otherwise it may affect the welding performance and reduce the notch toughness.

Niobium: It is a very strong carbide forming element. Niobium strengthens steel through precipitation hardening and grain refinement. Because niobium carbide has the characteristics of stability and dispersion, it can refine grains, improve the strength and toughness of steel, and make steel have Good resistance to hydrogen.

Titanium: acts like vanadium and niobium, but is only used for killed steels due to its strong deoxidizing properties. Titanium is the strongest carbide former and can improve the stability of steel in high temperature and high pressure hydrogen atmosphere. Titanium can refine grains and improve the strength and toughness of steel.

Boron: Generally, the amount of boron in steel is very small. A small amount of boron can improve the hardenability of steel and improve the high temperature strength of steel.

Nitrogen: It can dissolve into ferrite and play a role in solid solution strengthening. Nitrogen does not form carbides in steel, but it can form nitrides with other alloying elements, such as TiN, AlN, to produce the effect of grain refinement. However, nitrogen will form pores and porosity in the steel, reducing the corrosion resistance of the steel.

Rare elements: extremely abundant in my country. Steelmaking often adds an appropriate amount of mixed rare elements, the main components of which are lanthanum, cerium, praseodymium and neodymium, which can purify the impurities on the grain boundary and improve the high temperature strength of the steel.


www.jstisco.com



Send Inquiry

whatsapp

Phone

E-mail

Inquiry