PH 13-8 Mo Stainless Steel is produced by vacuum induction melting plus consumable electrode vacuum arc remelting (designated VIM-VAR). This melting process is used to yield high quality, closely controlled chemical compositions and optimum solidification conditions for aerospace applications.
Product Description
| Grade | PH13-8Mo, XM-13, UNS S13800, DMS 2100 Grade, HMS 6-1105 REV A AMD 3, ST0160LB0013 REV E, ASTM F899-12B, RMS-150 REV N for sizes 3.625” Max, SAE 13-8, ATI 13-8 Supertough Alloy |
| Specification | AMS 5629, ASTM A564 |
| Thickness | 0.25”(6.35mm) through 8”(203.2mm) or as customized |
| Width | 500 MM TO 2500 MM or as customized |
| Length | 2500 MM TO 12500 MM or as customized |
| Surface | Mill finish, 2B finish, Polish, 8k, Solution Annealed, Pickled, BA, HL, 2D, No.1 etc |
| Application | PH 13-8 Mo Stainless Steel can be used to advantage in sour oil and gas environments where other martensitic stainless steels are borderline or deficient. When heat treated at temperatures of 593 °C (1100 °F) and above, ARMCO PH 13-8 Mo Stainless Steel exhibits both substantially greater strength and better resistance to sulfide stress cracking than ARMCO 17-4 PH and Type 410 in their most resistant conditions. |
Chemical Composition(%)
| Fe | Cr | Ni | Mo | Al |
| balance | 12.25-13.25 | 7.5-8.5 | 2.0-2.5 | 0.9-1.35 |
| Mn | N | Si | C | P |
| 0.2 max | 0.1 max | 0.1 max | 0.05 max | 0.01 max |
www.jstisco.com
Hot Tags: ph 13-8 mo stainless steel flat bar, China ph 13-8 mo stainless steel flat bar suppliers, manufacturers, factory, Alloy Steel Sheet Q345
