Alloy 725 is highly resistant to corrosion and is age hardenable for extremely high strength. It is used in a broad range of severe corrosive environments. The strength of age-hardened A725 is twice that of A625 annealed. Strength in A725 is obtained by heat treatment and can also be cold worked for even higher strength. There is also a high resistance in reducing and oxidizing environments and increased resistance to pitting and crevice corrosion in sea water and stress corrosion cracking.
Due to outstanding corrosion resistance and high strength, applications for this alloy are used for hangers, side pocket madrels, springs and polished bore receptacles for sour gas service. The petrochemical and processing industries are good candidates for this alloy. A725 is also used for high strength fasteners in marine applications to resist corrosion, pitting and crevice attack in sea water.
Product Description
| Item | Inconel 725 Flat Bar |
| Grade | UNS N07725 |
| Standard | FMC Spec M40504, NACE MR-0175, ISO 15156, ASTM B 805, ASME Code Case 2217, HA91 |
| Thickness | 0.05-200mm or as required |
| Width | 1.5-200mm or as required |
| Length | 0.1-6m or as required |
| Surface | Hot rolled plate (HR), Cold rolled sheet (CR), Pickel, Polish |
www.jstisco.com
Hot Tags: inconel 725 flat bar, China inconel 725 flat bar suppliers, manufacturers, factory, Alloy Steel Sheet Q345
